Loadstar Sensors LoadVUE (LV-400,LV-1000,LV-4000,LV-7000) Load Cell - Manual (Page 21)

LoadVUE User Guide • 19
Loadstar Sensors, Inc. • www.loadstarsensors.com
Appendix A: Special Instructions for High Data Output Rate Sensors
Some versions of iLoad Digital USB load cells offer a high data output rate of more than 500 weight
readings per sec. When used with these load cells, LoadVUE can log data at these high rates (at the
Maximum log interval setting). To obtain data at these higher rates, you must change the COM port
settings as shown below.
Note: The actual logging rate will depend on the computer speed. It is strongly recommended that a
dual-core (or more) processor be used to log the data for high throughput load cells.
Open the Hardware Device Manager. You can do so by going to the Control Panel in Windows and
double-clicking on
System . On the System dialog box click on the Hardware tab and click on the
Device Manager button.
When your iLoad Digital USB sensors is connected and correctly installed, you should see a COM
port assigned to it as shown highlighted in the following screen shot (next page).