Operations, 2 laws pertaining to spark arresters, 3 operating safety – Marshalltown 46E11 Cyclone Power Trowels User Manual

Page 6: Caution, Warning

Advertising
background image

1. Read operating and safety instructions before using the Cyclone™ Power Trowel and operate the
machine in accordance with the manufacturer’s instructions.
2. Inspect your Cyclone™ Power Trowel for damage or tampering that can sometimes occur during

shipping. If damage is found, file a claim with your carrier immediately. Mark freight bill of landing as

damaged shipment.
3.

Do not operate your Cyclone™ Power Trowel if any guards have been removed or if the “Safety

Switch” is not operational.
5. Only trained personnel should be allowed to operate your Cyclone™ Power Trowel.
6. No foreign objects such as buckets, tools, or materials should ever be attached or allowed to ride
on the trowel during operations.
7.

Do not attempt to fill fuel tank or oil sump while engine is running. Allow engine to cool 5 minutes

before refueling.
8. Never attempt to operate the trowel on steeply inclined surfaces.
9. Do not use over-the-counter hardware to replace manufacturer’s hardware.
10.

HEALTH HAZARD: When operating machines with gas engines in confined areas, the fumes MUST be ventilated!

11. Always wear safety goggles and gloves when operating the Cyclone™ Power Trowel.

1.1 Safety Notes

This manual contains NOTES, CAUTIONS, and WARNINGS which must be followed to reduce the possibility of improper
service, damage to the equipment, or personal injury. Read and follow all NOTES, CAUTIONS and WARNINGS included
in instructions.

NOTE:

Contains additional information important to a procedure

CAUTION:

Provides information important to prevent errors which could damage machine

or components

WARNING:

Warns of conditions or practices which could lead to personal injury or death

1.2 Laws Pertaining to Spark Arresters

Notice:

Some states require that in certain locations spark arresters be used on internal combus-

tion engines. A spark arrester is a device designed to prevent the discharge of sparks or
flames from the engine exhaust. It is often required when operating equipment on forest
ed land to reduce the risk of forest fires. Consult the engine distributor or local authorities
and make sure that you comply with regulations regarding spark arresters.

1.3 Operating Safety

SAFETY PRECAUTION

Familiarity and proper training are required for the safe operation of this equipment! Equipment operated improperly or by
untrained personnel can be dangerous! Read the operating instructions contained in both this manual and the engine manual
and familiarize yourself with the location and proper use of all the controls.

1A

OPERATIONS

1A-4

Advertising
This manual is related to the following products: