Marshalltown FCS86 SURFACE SHARK Floor Stripper - Manual (Page 16)

PAgE 16 FCS86 SuRFACE ShARK™ FLooR STRIPPER
FIguRE 13
THE BALL DETENT MUST BE FULLY
EXPOSED AGAINST THE MAIN FRAME TO
PROVIDE THE PROPER PIN RETAINING
FORCE. AN IMPROPER PIN RETAINING
C O N F I G U R A T I O N C A N R E S U L T I N
U N E X P E C T E D O P E R A T O R H A N D L E
MOVEMENT. THIS OCCURRENCE CAN
RESULT IN PROPERTY DAMAGE AND/OR
PERSONAL INJURY.
3) Loosen the threaded handle knobs and extend the
operator handle out until it stops against the threaded
studs. Retighten the knobs. FIguRE 14.
Improper knob tension and/or improperly
securing the operator handle to the main
frame can result in an unstable platform
c o n f i g u r a t i o n . A n u n s t a b l e p l a t f o r m
configuration can result in property damage
and/or personal injury.
FIguRE 14
4) Tilt the Floor Stripper back until the operator
handle comes in contact with the surface. The Floor
Stripper may not be in a stable position in this
configuration. To minimize the possibility of prop-
erty damage and/or personal injury, properly secure
an appropriate weight to the handle for added stability.
other means can also be utilized to support the frame
and provide proper machine stability. Appropriate
wheel chocks are also recommended. FIguRE 15.
FIguRE 15
EXERCISE EXTREME CAUTION WHEN
WORKING NEAR OR UNDER THE FLOOR
STRIPPER WITH THE OPERATOR HANDLE
TILTED BACK IN THE SERVICE POSITION.
I F T H E F L O O R S T R I P P E R I S N O T
P O S I T I O N E D I N A S T A B L E
C O N F I G U R A T I O N , W I T H A D E Q U A T E
COUNTERWEIGHT PROPERLY SECURED,