0 introduction, 0 what you need to know, Introduction – MTS Series 111 Accumulator User Manual
Page 14: What you need to know
3.1.0 Introduction
The MTS Series 111 Accumulators stabilize the hydraulic lines in your system. There are two models available:
•
The Model 111.11B Accumulator is a boss port-mounted accumulator that requires a boss adapter fitting
for mounting.
•
The Model 111.12C Accumulator is bolt-mounted to a flange and typically has a larger nitrogen gas capacity
than the Model 111.11B.
3.2.0 What you need to know
MTS Systems Corporation assumes that you know how to use your controller. See the appropriate manual
for information about performing any controller-related step in this manual's procedures. You are expected
to know how to perform the following procedure:
•
Turn hydraulic pressure on and off
•
Select a control mode
•
Manually adjust the actuator position
14 Series 111 Accumulator Product Information
3.0 Introduction