About the 244 series actuator, What you need to know – MTS Series 244 Actuators User Manual
Page 14
Advertising
About the 244 Series Actuator
The Series 244 Actuator is a hydraulically powered device that provides displacement of (or forces into) a
specimen or structure for testing.
What You Need to Know
MTS Systems Corporation assumes that you know how to use your controller. See the appropriate manual
for information about performing any controller-related step in this manual’s procedure. You are expected to
know how to perform the following procedures:
•
Turn hydraulic pressure on and off.
•
Select a control mode.
•
Manually adjust the actuator position.
•
Install a specimen.
•
Define a simple test.
•
Run a test.
14 Series 244 Actuators Product Information
Introduction
Advertising