MTS Series 244 Actuators - Manual (Page 55)

LVDT Cable Connection
Description Item
Output 1
Ground 2
Excitation 3
Yellow 4
Blue 5
Green 6
Black 7
Red 8
Hydraulic Connections
Note:
When the Series 244 Actuator is installed in a load unit, the hydraulic connections are made through
a manifold connected to a Series 298 Actuator Manifold.
Hydraulic connections to the Series 244 Actuator are made through a manifold that connects the ports of
each end cap. The manifold has hydraulic pressure and return ports stamped P and R respectively. These
ports are connected to matching ports located on a hydraulic service manifold (HSM).
See the servovalve manual for servovalve installation information.
Series 244 Actuators Product Information 55
Installation