MTS Series 651 Environmental Chambers - Manual (Page 15)

Series 651 Environmental Chamber 15
Chamber models
The following table lists the differences between the environmental chamber
models. Each environmental chamber can be used with any load unit but is
recommended for specific load units.
M ODEL
N UMBER
T EMPERATURE
R ANGE
I NTERIOR
D IMENSIONS*
* The dimensions are specified as width x depth x height.
W EIGHT†
† The weights are approximate.
L OAD U NIT‡
‡ These are typical uses; some load units can accommodate any chamber.
C ART P ART
N UMBER§
§ The last two digits specify color; -02 is gray, -03 is brown.
651.05C-02
Tabletop -75–275°C
(-100–525°F) 305 x 305 x 457 mm
(12 x 12 x 18 in) 95 kg
(210 lb) 358.02
359 Custom
651.06E-03
Standard -129–315°C
(-200–600°F) 356 x 432 x 559 mm
(14 x 17 x 22 in) 122 kg
(270 lb) 318 513150-02
513150-03
651.04E-01
1000 Hz Elastomer -129–200°C
(-200–400°F) 305 x 305 x 305 mm
(12 x 12 x 12 in) 86 kg
(190 lb) 331.05 424780-02
424780-03
651.06E-01
400 Hz Elastomer -129–315°C
(-200–600°F) 305 x 305 x 406 mm
(12 x 12 x 16 in) 104 kg
(230 lb) 331.02 446662-02
446662-03
651.10E-04
1000°F -129–540°C
(-200–1000°F) 356 x 432 x 660 mm
(14 x 17 x 26 in) 200 kg
(440 lb) 318 513150-02
513150-03
651.06E-04
Stretch -129–315°C
(-200–600°F) 356 x 432 x 813 mm
(14 x 17 x 32 in) 140 kg
(310 lb) 318 513150-02
513150-03