MTS Series 651 Environmental Chambers - Manual (Page 27)

Series 651 Environmental Chamber 27
Operation
To remove a specimen from the environmental chamber following a test:
The chamber interior and the specimen can be very hot or very cold
following a test.
Working in the chamber before it has returned to room temperature can
cause burns or freezing injuries.
Take precautions to avoid touching hot or cold surfaces with bare skin. Use
appropriate tools and personal protection equipment. Consult your lab’s safety
guidelines and procedures.
1. Stop the test and turn the chamber switch off.
2. Open the chamber door. Allow the specimen to return to room temperature,
if possible.
3. Remove the specimen from the grips following the instructions in the
appropriate grip manual.
WARNING