MTS Series 646 Hydraulic Collet Grips - Manual (Page 19)

Specifications
Series 646 Hydraulic Collet Grips Introduction 19
Model 646 Grip with Furnace Extensions Dimensions
Mounting holes in the base of each grip are threaded in either SI International
(millimeter) or U.S. Customary (inch) thread dimensions, as shown for
dimension “A” in the pervious table.
P ARAMETER D IMENSION*
* SI International (U.S. Customary)
A (mounting threads) M27 x 2mm or 1 in – 14
B 172 mm (6.77 in)
C 224 mm (8.80 in)
D 115 mm (4.52 in)
E (wrench flats) 29 mm (1.125 in)
F (travel) 3.2 mm (0.125 in)
G (specimen adapter wrench flats) 32 mm (1.25 in)
H (maximum diameter) 38 mm (1.5 in)
Weight (each grip) 18.5 kg (40.8 lb)