MTS Series 646 Hydraulic Collet Grips - Manual (Page 48)

Series 646 Hydraulic Collet Grips 48 Installation
Grip Water Cooling Assembly Configurations for Servohydraulic Frames
Cut hoses to required length at installation. MTS provides a hose (quantity 1)
with the water cooling assembly for connection to the water service. See the
following table for the hose length provided by MTS. The water cooling
manifold will mount to any flat 9” x 8” (229 mm x 203 mm) magnetic surface.
Cooling Water Flow Assembly
P ART N UMBER H OSE L ENGTH FOR
W ATER S ERVICE
S UPPLIED BY MTS
( QUANTITY 1)
057-697-501 none
057-697-502 12 ft (3.65 m)
057-697-503 24 ft (7.30 m)