MTS Advantage Screw Action Grip - Manual (Page 18)

MTS Advantage™ Screw Action Grips Installation 18
1. Position the crosshead and actuator.
A. Switch on electrical power at your test controller.
B. Apply high hydraulic pressure to the load unit.
C. Position the crosshead and actuator for easy bend fixture
installation.
D. Make sure the crosshead is locked.
E. Turn off hydraulic pressure.
2. Prepare the mounting hardware.
Force
Transducer
Actuator
Advantage™
Screw Action Grip
m
Advantage™
Screw Action Grip
m
Socket Head
Cap Screw
Socket Head
Cap Screw