MTS Advantage Screw Action Grip - Manual (Page 36)

MTS Advantage™ Screw Action Grips Operation 36
How to Change Pucks
To change the compression pucks:
1. A puck can be inserted into the right side of the grips or on the left side.
When changing the puck, use one hand and hold the face against the
housing with light pressure. While holding the face against the housing,
unscrew the appropriate piston screw.
2. Remove the piston screw.
3. Use the MTS-supplied puck removal tool to remove the puck. Stick the
puck removal tool into the puck. Pull the puck down gently and then
pull the puck out.
4. Put the new puck into the grip housing and onto the piston cylinder. Use
the puck removal tool to position the new puck into place.
5. Screw the piston screw back into the grip.
Advantage™
Screw Action Grip
m
Compression
Puck
Piston
Cylinder
Piston
Screw
Piston
Cylinder
Grip
Housing