MTS Advantage Pneumatic Grips - Manual (Page 41)

Selecting Face Surfaces
Advantage™ Pneumatic Grips Operation 41
Grip Faces for the 10 N Grips
These grip faces are for the 10 N (2 lbf) Advantage Pneumatic Grips and
specimens from 0 to 5 mm thick.
15 mm x 8 mm
(0.6 in x 0.3 in)
Table 1:
Face Surface Part Number Obsolete P/N *
* Obsolete part numbers are associated with older grips. Current part
numbers are direct replacements.
Smooth 056-163-701
Serrated 056-163-702 38.00662
Rubber †
† Rubber grip faces are for use only at room temperature.
056-163-703 38.00401