Round wedges vee-shaped wedges – MTS Advantage Pneumatic Grips User Manual
Page 46
Advantage™ Pneumatic Grips
Selecting Face Surfaces
Operation
46
Round wedges
Vee-shaped wedges
The vee wedge specimen diameter specification represents the diameter range if
the specimen is installed from the side of the grips (the widest opening). The
specimen diameter also lists the maximum specimen diameter if the specimen is
installed from the top of the grips.
Surface Specimen
Diameter
Part Number
Surfalloy
10 mm
50507912
Surfalloy
15 mm
50507913
Surfalloy
25 mm
50507914
Surfalloy
0.5 in
50507915
Surfalloy
1 in
50507916
Surface
Specimen Diameter
*
*
The specification has a diameter range for installing the specimen from the side of
the grips. The second specification is the maximum diameter if the specimen is
installed from the top of the grips.
Part Number
Serrated
3.0–8.1/9.4 mm (0.12–0.32/0.37 in)
50507908
Serrated
8.9–10.9/15.2 mm (0.35–0.43/0.60 in)
50507909
Serrated
14.0–18.0/20.8 mm (0.55–0.71/0.82 in)
50507910
Serrated
20.1–22.9/27.2 mm (0.79–0.90/1.07 in)
50507911