MTS Multi-Pump Control Manager - Manual (Page 26)

Multi-Pump Control Manager
26
Unit
Operation
8 Unit Hours Indicator/Display: Indicates total running time of the HPU.
9 Oil Pressure Indicator/Display: Indicates output pressure of the HPU.
10 Oil Temperature Indicator/Display: Indicates the temperature of the hydraulic
fluid in the reservoir.
11 Oil Level Indicator/Display: Displays the level of the hydraulic fluid in
the reservoir in 1/8 increments. The level is relative to the
usable oil volume. Note that the oil level switch, which
controls the low level interlock, can be set at a level higher
than the oil level sensor. Values will match when the oil level
switch is set at its lowest setting.
12 Oil Flow (optional) Indicator/Display: Displays the total hydraulic fluid flow
from all running pumps. Requires that the flow meter and
ROD are present and enabled.
Item Name Description