MTS Multi-Pump Control Manager Remote Human-Machine Interface - Manual (Page 13)

Tabletop and Pedestal Mount
Remote Human Machine Interface Installation 11
Installation
The Remote Human Machine Interface (RHMI) allows you to operate a single
Hydraulic Power Unit (HPU) remotely. The Remote Human Machine Interface
(RHMI) comes in two configurations: a standalone unit and a pedestal mount
unit. The standalone unit can be placed on a table or mounted on the wall.
Tabletop and Pedestal Mount
Installation of the tabletop or pedestal mount consists of simply placing the unit
where you want it and connecting the cables.
Wall Mount
Installation of a wall mount requires some disassembly and installing wall
anchors to support the unit before connecting cables. Proceed as follows:
1. Remove the screws securing the top cover and remove the top cover.
2. Hold the bottom sheet metal case against the wall in the desired location and
mark the mounting holes.
3. Install wall anchors at the marked locations.
4. Screw the bottom sheet metal case to the wall anchors.
5. Install the top cover 180 degrees from the original position for proper
orientation.