MTS Isolation Service Manifold Controller - Manual (Page 31)

Isolation Service Manifold Controller Maintenance 31
Maintenance
There are no customer serviceable components on the Isolation Service Manifold
(ISM) Controller. Maintenance consists of keeping the controller and work area
clean.
Disconnect the power cord from the wall outlet before cleaning or
inspecting any part of the controller.
Inadvertent electrical component contamination with detergents or cleaning
fluids can cause circuits to short resulting in equipment damage. Be careful
not to spill and cleaning liquid on the frame.
Make sure the electrical power is disconnected. Be careful when using cleaning
fluids.
Observe all manufacturers recommendations and cautions when using any
cleaning solution.
To avoid hazardous conditions, always follow the manufacturers
recommendations and cautions.
General cleaning
Clean the ISM Controller as often as needed. Use a damp, lint-free rag to clean
the sheet metal. If necessary, mild detergent or cleaning fluid can be used.
WARNING
CAUTION