MTS Axial Extensometers User Manual
Page 16
Introduction
16
What you need to know
This manual assumes that you know how to use your system controller.
See the appropriate manual for information about performing any
controller-related step in this manual’s procedures. You are expected to
know how to:
•
Select a control mode.
•
Manually adjust the actuator position.
•
Zero a sensor output.
•
Install a specimen.
Related documentation
This manual covers topics that are common among all axial
extensometers. Specific information about a given extensometer is
available from the drawings that are included with it.
Each extensometer may include the following documents:
•
An installation drawing provides the specifications for your
extensometer. It also includes detailed drawings and notes related
to setting up and installing the extensometer.
•
A Final Inspection card provides information such as the serial
number, as tested excitation voltage, and other performance data.
•
An Extensometer Calibration Data sheet is included when MTS
calibrates the extensometer.
•
You may have drawings for optional kits for your extensometer.
These drawings include specifications and installation information
for the given option.
•
You may have a model application drawing that lists the family of
extensometers for the model number you purchased. It lists the
specification differences among the extensometer family. The
drawing also includes the part number of the installation drawing
for your extensometer and the wiring diagram of the connector.
This manual is designed to be used with these documents.