Multiquip DCA45SSIU3 - Manual (Page 22)

PAGE 22 — DCA45SSIU3 50 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #2 (12/19/08)
OUTPUT TERMINAL PANEL FAMILIARIZATION
OUTPUT TERMINAL PANEL
The Output Terminal Panel (Figure 6) shown below is
located on the right-hand side (left from control panel) of
the generator. Lift up on the cover to gain access to
receptacles and terminal lugs.
NOTICE
Terminal legs “O” and “Ground” are considered bonded
grounds.
OUTPUT TERMINAL FAMILIARIZATION
The “Output Terminal Panel ” (Figure 6) is provided with
the following:
Three 100/200V output receptacles @ 50 amp 
Three Circuit Breakers @ 50 amps 
Two 100V GFCI receptacles @ 20 amp

Two GFCI Circuit Breakers @ 20 amps

Five Output Terminal Lugs ( U, V, W, O, Ground) 
Output Terminal Panel Figure 6.