Northern Connectors Souriau UTL Series Push-Pull Connectors - Manual (Page 30)

30 © 2012 – SOURIAU
Handle & Interchangeable Heads
User guide
1) Fully close then release the tool, keep it open.
Open the 2 pins.
2) Choose the adapted head (sold separately), keep vertically
and slide it into the handle till the mecanical end.
3) Close simultaneously the two pins to maintain the head.
4) Strip the cable properly checking the size recommended
in the catalog.
5) Place conductors, with no deteriorations, in the bucket
contact. All strands to be located in the crimp bucket.
6) Position the contact in the bottom of the tools by checking out
its
orientation.
7) To crimp contact assembly-cable, tighten sharply the clip
to the end of the mechanism.
8) To control crimp quality, slighty pull cable with two fi ngers
to control retention.
UTL Series
Technical information