Northern Connectors Harting Han-Yellock Industrial Connectors - Manual (Page 5)

25.
05
Han-
Yellock
Han-Yellock ®
Han-Yellock ® adapter frame
Han-Modular ® series interfaces can be established
using the Han-Yellock ® adapter frame. The connection
is based on a male/female contact arrangement.
Inserting the adapter frame in the housing:
• The adapter frame can be snapped into the hou-
sing, bulkhead mounting, on the termination side
and the mating side (refer to the illustration).
• The lateral plastic tabs („B“) are pressed into the
metal clamps on the housing.
• The adapter frame then snaps in with a distinctly
audible click.
① metal clamp
Removal the adapter frame:
• The removal tool part no.
"https://b2b.harting.com/ebusiness/en/
11 99 000 0001
"
is re-
quired for disassembly.
• The removal tool is inserted into the metal clamp
and pressed down as shown in the following
illustration. A screwdriver need also be placed
into the notch in the housing.
• The removal tool should then be pulled outwards
to remove the adapter frame from the housing.
• The removal can be made from the termination
side as well as from the mating side.
• The process is identical for both housings, bulk-
head mounting, and carrier hoods.