Precisionsound Tranzitone - Manual (Page 11)

11
© Copyright Precisionsound 2012 www.precisionsound.net
Instrument interface: FX
The signal flows from the section amplifier modules, via the filters if they are active, into a bank of
six effects that can be individually engaged and adjusted. These are shown on the next page of the
interface, together with controls for the modulation and pitch bend wheels.
Leslie
This is a cabinet and rotating speaker simulator.
The red button next to LESLIE switches the rotating speaker on/off.
The other red button switches the cabinet simulation on/off.
The Balance, Distance and Wet dials control the tone, stereo image
and volume of the rotator.
The speed of the rotator is controllable with the Fast/Slow switch.
The drop-down menu lets you change the simulated cabinet type.
 The cabinet simulation can be used independently from the rotating speaker, by switching
the Leslie button off and the cabinet button on.