Precisionsound Tranzitone - Manual (Page 8)

8
© Copyright Precisionsound 2012 www.precisionsound.net
Instrument interface: Envelope and Filters
The signal from the active registers flows into amplifier modules for each section. These are shown
on the next page of the interface, together with controls for filters and the LFO.
Amplifier modules
For each section, you can shape the dynamics with an ADSR envelope, change the volume, and
adjust the velocity sensitivity (the relation between note volume and MIDI key pressure).
The red button next to the section name switches the section
on/off.
The sliders control the attack (A), decay (D), sustain (S), and release
(R) of the envelope for the section.
There are also dials for the section volume and velocity sensitivity.
These amplifier controls affect all the registers in their respective section. Volume differences
between registers, set on the Registers interface page, are preserved. In other words, the section
volume acts like a VCA master fader for a VCA group containing the registers in the section.