MacDon HC10 for D-Series - Manual (Page 113)

MAINTENANCE
Symptom Problem Solution Reference
Forming shield is too high. Lower forming shield. See Adjusting Forming
Shield Height, page 84 .
Windrow lacks shape.
Deflector fins inside
forming shield are
improperly adjusted. Adjust fins. See Adjusting Deflector
Fins, page 85 .
Feed draper is not tracking
properly. Feed draper tensioners
are improperly adjusted. Check feed draper tension
and adjust accordingly. See Section 5.6.1
Adjusting Feed Draper
Tension, page 95
.
Side draper is
backfeeding. Overlap of side drapers
and feed deck is
inadequate. Adjust overlap. See Section 3.5 Installing
the Feed Deck, page 35 .
169254
105
Rev. D