6break-in period, Break-in period, Caution – MacDon HC10 for D-Series User Manual
Page 85: 6 break-in period
4.6
Break-in Period
When operating the hay conditioner for the first time, operate the conditioner slowly for five minutes, watching and
listening FROM THE OPERATOR'S SEAT for binding or interfering parts.
CAUTION
Before investigating an unusual sound or attempting to correct a problem, shut off engine, engage
parking brake and remove key.
NOTE: Conditioner will not operate until oil flow fills the lines.
NOTE: Until you become familiar with the sound and feel of your new hay conditioner, be extra alert and
attentive.
After First Five Hours of Operation:
• Adjust the tension of roll drive belt. Refer to section
. Continue to check the belt tension
periodically for the first 50 hours.
• Tighten any loose hardware. Refer to section
Torque Specifications
.
169254
77
Rev. D