MacDon CA25 OM - Manual (Page 125)

SECTION 8. MAINTENANCE AND SERVICING
169593
123
Revision B
d. Rotate guard locking ring (H) counterclockwise
with a screwdriver until lugs (J) line up with
slots in guard.
e. Pull guard off driveline.
f. Repeat above steps c. to e. for the other
driveline guard.
8.7.4 Guard Installation
a. Slide guard onto driveline, and line up slotted
lug on locking ring (A) with arrow (B) on guard.
b. Push guard onto ring until locking ring is visible
in slots (C).
c. Rotate ring (D) clockwise with a screwdriver to
lock ring in guard.
d. Push grease zerk (E) back into guard.
e. Repeat steps a. to d. for the other guard.
(continued next page)
H
J
C
D
E
A
B