MacDon CA25 OM - Manual (Page 42)

SECTION 7. OPERATION - CAT LEXION
169593
40
Revision B
g. Connect hydraulic hoses as follows:
1. Unscrew knob (F) on combine coupler (G)
to release coupler from combine
receptacle.
2. Remove cover (J) from adapter receptacle.
3. Clean mating surface of coupler (G), and
locate onto adapter receptacle (K).
4. Turn knob (F) to secure coupler to
receptacle.
5. Connect combine harness (L) to reel
fore-aft/header tilt selector receptacle (M).
h. Place cover (J) on combine receptacle.
i. Rotate disc (N) on adapter driveline storage
hook, and remove driveline from hook.
j. Attach driveline to combine output shaft (O).
(continued next page)
F
G
O
F
G
K
M
L
J
N
J