Retsch GM 200 - Manual (Page 34)

Fault messages
34
Pos : 10.1 /00005 Ü berschrif ten/ 1. Ü berschrif ten/ 1 F ehler mel dungen @ 2\ mod_1259056589728_9.doc @ 17580 @ @ 1
7 Fault messages
Pos : 10.2 /00010 Bedi enungsanleit ung en Kapitels ammlungen/ GM200 (2010)/ 0035 GM200N Fehl ermeldungen/ 3505 GM 200_2010 Modul Fehler meldung en @ 3\ mod_1279783114219_9. doc @ 21850 @ @ 1
F01 Motor is not running
F02 Motor is switched off due to overload Restart grinding process with small
feed quantity.
F03 Motor speed too low / high
F04 Hood open
F05 Braking time too high
F06 Motor overheated
Allow motor to cool and restart.
F07 Hood monitoring defective Check the fault message:
Press the START button when the
hood is open.
The “time“ and "speed“ segment
displays flash evenly.
Close the hood to rectify fault.
F08 Overspeed through hardware
Pos : 11.1 /00010 Bedi enungsanleit ung en Kapitels ammlungen/------- Seit enumbruc h ----------- @ 0\ mod_1222344373758_0. doc @ 2386 @ @ 1