Retsch AS 200 - Manual (Page 10)

31.07.2012

Retsch GmbH
10
The operating controls and their functions
Summary table
Element AS200 model Description Function
A
all models Shipping stabilization; wing
screw with nut and washer Protects the unit during transportation;
must without fail be removed before use.
AA all models Socket Attachment point for the power cord.
B Accessories Sieve fixing cover, standard Covers the upper analytical sieve; in
conjunction with the retainer nuts D or the
quick-action clamps G it secures the sieve
stack.
BB
all models Fuse holder Accepts two glass-tube fuses, 4 A, slow-
blow
C
Accessory Sieve fixing cover, economy Covers the upper analytical sieve; in
conjunction with the retainer nuts D it
secures the sieve stack.
D
Accessory standard and economy fixing
nuts In conjunction with the B or C sieve fixing
cover, they secure the sieve stack.
E
Accessory standard and economy
threaded spindles Used together with the B or C sieve fixing
cover and the nuts D, they secure the
sieve stack.
F
Accessory Hex nuts Locks the threaded spindles E, screwed in
place, on the sieve plate.
G
Accessory Quick-acting clamps Permits quick clamping and loosening of
the sieve stack in conjunction with the
sieve fixing cover B and the stationary
rods H.
H
Accessory comfort stationary rods Allows for quick clamping and loosening of
the sieve stack in conjunction with the
sieve fixing cover G and the sieve fixing
cover B.
I
Contained in
G
Lever, red Pressed upwards, it releases the sieve
fixing cover B.
J
all models ON / OFF switch Connects and disconnects the unit to the
line power supply.
K
Contained in
G
Lever, green When pressed repeatedly, it moves the
sieve fixing cover B downward, thus fixing
the sieve stack.
L
AS200 Display: 0.20 to 3.00 mm Shows the vibration height (twice the
amplitude) from 0.20 to 3.00 mm.