Retsch AS 200 - Manual (Page 27)

31.07.2012

Retsch GmbH
27
!
Never place the AS200 directly in a basin for
operation.
Fatal electrical shock hazard.
!
During wet sieving always connect the AS200 to a
socket which is protected by a ground fault
interrupter.
Adjust the volume of water applied so that it will
just wet the surface of the screen.
Water backing up in the sieve stack can cause
overloading and thus may damage or destroy the
sieve weave.
The loading capacity charts provided in the Appendix
to these operating instructions are not applicable to
wet sieving.
Due to the difficulty in defining the volume of water in
the sieve stack, it is impossible to make reliable
statements for wet sieving.