Operation, Operating elements and their use – Retsch AS 400 User Manual
Page 12
06.11.2012
Retsch GmbH
12
Operation
Operating elements and their use
A Cold device plug combination
C Fuse drawer with glass fuses
B Serial connection
D Protective cap for the serial connection
E ON / OFF switch
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16
1
Key call-ups the preset sieve parameters. P1-P9 and on
2
The selected program P1-P9 / on is displayed here. If the AS400 is controlled by the
EasySieve
®
software program, ES appears in the display.
3
Key activates adjustment mode for the preselected program places P1-P9
4
Key reduces the speed, 50-300 r.p.m.
or sieve plate acceleration in "g"
5
Display shows the speed from 50 – 300 r.p.m. or sieve plate acceleration in "g"
6
Key increases the speed, 50-300 r.p.m. or sieve plate acceleration in "g"
7
Key reduces the interval time, 1 – 10 min.
8
Display shows the preselected interval time 1 – 10 min.
9
Key increases the interval time, 1 – 10 min.
10
Key switches intermittent mode ON, the left-hand LED illuminates.
11
Key switches intermittent mode OFF, the right-hand LED illuminates,
12
Key increases the sieving period, 1 – 99 min.
13
Display shows the preselected sieving period 1 – 99 min.
14
Key reduces the sieving period, 1 – 99 min.
15
Key START, starts the sieving process and the green LED illuminates
16
Key STOP, ends the sieving process and the red LED illuminates