RKI Instruments GD-K7D2 (24 VDC) - Manual (Page 13)

Model GD-K7D2 (24 VDC) Sample Draw Transmitter • 9
Figure 6: Installing Tubing in the Sample Fittings
3. Connect the sample filter to the tube. The sample filter has flexible tube stubs on each
end. Push one end onto the sample tube.
4. Connect another length of sample tubing to the other side of the sample filter and
route it to the sampling area. Be sure not to exceed the maximum sample tubing
length listed in Table 2.
Figure 7: Installing the Sample Filter
Tubing Insert
Ferrule
Tube Nut
4 mm x 6 mm
PTFE Teflon Tubing
20 cm Max
To Sample Area
Sample Filter
Sample In Fitting