RKI Instruments GD-K7D2 (24 VDC) - Manual (Page 26)

22 • Model GD-K7D2 (24 VDC) Sample Draw Transmitter
Parts List
Table 4 lists replacement parts and accessories for the GD-K7D2.
Table 3: Parts List
Part Number Description
GD-K7D2-XXXX-24V GD-K7D2 transmitter (specify target gas when ordering), 24 VDC
version
30-1016RK Replacement pump, w/cable & connector, for 24 VDC GD-K7D2
33-0165RK Replacement filter, without flexible tubing stub on ends
33-0165RK-01 Replacement filter, with flexible tubing stub on ends
43-4155RK Fuse, 5 mm x 20 mm, 2 amp, fast acting
49-1410RK Lithium battery pack, 3.6 volts, for sensor bias backup
71-0078RK GD-K7D2 (24 VDC) Operator’s Manual (this document)
81-XXXX Calibration kit (specify target gas when ordering)
81-XXXX Calibration cylinder (specify target gas when ordering)
81-0076RK Zero air calibration cylinder (17 liter)
81-0076RK-01 Zero air calibration cylinder (34 liter)
81-0076RK-03 Zero air calibration cylinder (103 liter)
81-1001RK Dispensing valve (for use with gas collection bag and 17-liter zero
air calibration cylinder)
81-1005RK Regulator, fixed flow, 6.0 LPM, no gauge or knob, for 34, 58, & 103
liter cylinders.
81-1054RK Regulator, demand flow, for 58 and 103 liter cylinders
81-1126RK Gas collection bag
ES-23A-NO Sensor, nitric oxide
ES-23AHS-ASH3 Sensor, arsine
ES-23AH-NO2 Sensor, nitrogen dioxide
ES-23AH-PH3 Sensor, phosphine
ES-23AH-SIH4 Sensor, silane (for scrubber applications, not interchangeable with
ES-23DH-SIH4)
ES-23DH-SIH4 Sensor, silane, standard sensor (not interchangeable with ES-
23AH-SIH4)
ES-23E-SO2 Sensor, sulfur dioxide, 0 - 15 ppm (not interchangeable with the
ES-238-SO2)
ES-238-SO2 Sensor, sulfur dioxide, 0 - 10 ppm (not interchangeable with ES-
23E-SO2)