RKI Instruments SD-705EC - Manual (Page 34)

PT2E-1140
７．Scrap of Sensor
Scrap of products
・ For used up sensors, be sure to return them to the manufacturer.
The return is requested via our nearest agent or RIKEN KEIKI..
・ Should any leak sensors be found, do not touch the leak liquid for sure
and put it in vinyl bag so that the liquid can not be leaked outside.
Then should any leak be found from the sensor to detector, make power
off the detector and contact our nearest agent or RIKEN KEIKI.
・ Regarding detector complete, treat it in the same as industrial scrap
(Non-flammable goods).
As there is the electrolyte in the sensor, do not disassemble absolutely.
When touch the electrolyte of it, the skin may be damaged and if goes
into eyes, there will be possibility of losing sight.
Then, if it sticks to clothes, the color of it may be changed or make a
hole. If should touch it, clean the wet part enough
with water.
WARNING ！
33