Salsbury Industries 19000 Series Cell Phone Lockers Surface Mounted - Manual (Page 10)

SALSBURY INDUSTRIES
1010 East 62 nd Street, Los Angeles, CA 90001-1598
Phone: 1-800-624- 5269 Int’l Phone: 323-846-6700
Fax: 1-800-624-5299 Int’l Fax: 323-846-6800
www.lockers.com www.mailboxes.com engineering @ mailboxes.com [email protected]
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2014 Salsbury Industries. All rights reserved. (Rev. 12, 1/21/2014) Page 10 of 10
Cell Phone Lockers
– 19000/19100 Series
Resettable Combination Lock Operating & Resetting Instructions
The resettable combination lock is a durable and easy-to-use lock providing resettable combination access without the need for keys. Please read this entire page
before use.
The lock has a four (4) digit combination setting. When the lock is locked
(closed), a red indicator appears in a window next to the operation knob.
When the lock is unlocked (open), a green indicator appears in the window.
There are two (2) modes of operation: fixed combination or resettable
combination. In fixed combination mode, the lock is continually opened and
closed with the same custom combination that was set. In the resettable
combination mode, the combination may be changed after each time the lock
is opened.
The factory preset combination is 0000. Master key operation may be used
at any time to open a lock.
Setup for a Fixed Combination
1. If locked, turn the four (4) dials to the factory preset combination (0000) or
the known combination that unlocks the lock.
2. Turn the operation knob clockwise 180  to the open position. The
indicator in the window will turn from red to green.
3. Turn the reset/fix stem on the back of the lock from the “Fix” to the
“Reset” position.
4. Returning to the front of the lock, set the desired custom fixed
combination on the four (4) dials.
5. On the back of the lock, return the reset/fix button back to “Fix”.
The lock is now set to continuously open using the custom fixed
combination. After locking, scrambling the four (4) dials will secure
the contents.
Setup for a Resettable Combination
1. If locked, turn the four (4) dials to the factory preset combination (0000) or
the known combination that unlocks the lock.
2. Turn the operation knob clockwise 180  to the open position. The
indicator in the window will turn from red to green.
3. Turn the reset/fix stem on the back of the lock from the “Fix” to the
“Reset” position. Leave the button in this position.
4. Close the door. Do not lock it.
The lock combination can now be resettable by the user setting their
own desired combination before turning the operation knob to the
locked position (red window indicator). After locking, scrambling
the four (4) dials will secure the contents.
Decode Operation
Used to determine lock combination.
1. Open the door. Use the master key if necessary.
2. Push the decode lever up and hold it in place. Rotate each of the dials on
the front of the lock until it stops or there is a “click” sound. Release the
decode lever.
3. Each dial will now be in the “open” combination position.
DECODE
LEVER
RESET/FIX
STEM
PUSH
RED/GREEN
INDICATOR
WINDOW
FOUR (4)
DIALS
OPERATION
KNOB