Salsbury Industries 19000 Series Cell Phone Lockers Surface Mounted User Manual
Page 6
SALSBURY INDUSTRIES
1010 East 62
nd
Street, Los Angeles, CA 90001-1598
Phone: 1-800-624-
5269 Int’l Phone: 323-846-6700
Fax: 1-800-624-5299
Int’l Fax: 323-846-6800
www.lockers.com
www.mailboxes.com
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2014 Salsbury Industries. All rights reserved. (Rev. 12, 1/21/2014) Page 6 of 10
Cell Phone Lockers - 19100 Series
Recessed Mounted with Front Access Panel
Installation Instructions
The recessed mounted cell phone locker must be securely supported by a frame constructed of 2”x4” or 2”x6” lumber. Construct support framing as
shown on page 8 of these instructions. Cut a hole in the wall according to the Rough Opening Dimensions calculated on page 7.
Installation Instructions
Place the unit in the rough opening. Open the front panel access compartment of the cell phone locker then open the front panel. Fasten the unit
(hardware not provided) to the support framing. Close the front panel then the front panel access compartment.
Notes
1. Wall opening and lumber frame must be square.
2. Do not deform, force, or twist the locker frame to fit an incorrect rough opening or fit against an irregular surface.