Assembly instructions – Schwank Parasol Series Portable User Manual
Page 8
4002/5-CB I&O Manual
IM080811
RD: NOV 2013
R.L. 02B
BA
6. ASSEMBLY INSTRUCTIONS
Fasten the post to the top of the post
brackets, aligning pre-drilled holes as
shown.
Use six M6 x 35mm bolts, washers &
nuts to attach post to post brackets.
Tighten securely
.
Page 5
Attach Wheel Kit to Base:
Assemble wheel brackets to base ‘L’ brackets using four #8 x
3/4” bolts and nuts (Note: Bolt heads face the wheel; Position
wheel brackets with curve “up”)
Align pairs of holes in each end of ‘L’ brackets to those in
opposite sides of the base - fasten in place with #8 x 3/4”
bolts & nuts. (NOTE: Position wheel brackets with curve “up”)
Assemble wheels to wheel brackets using axle bolts & nuts
Attach the 3 post mounting brackets to the
Cylinder Base as shown.
Use three M8 x 15mm bolts to secure
brackets to the base
Wheel brackets curve ‘up’