Schwank STSp-CANADA - Manual (Page 15)

SP-MSTP-AC-15A
STS-p Manual
RD: DEC, 2003
RL:15
KH
Page 11
TABLE 4
MODEL TURBULATOR LENGTH
(IF REQUIRED)
STS-p 200-70/60/50 10’
STS-p 175-70/60/50 10’
STS-p 155-60 not required
STS-p 155-50 not required
STS-p 155-40 10'
STS-p 130-50 not required
STS-p 130-40 10'
STS-p 130-30 14'
STS-p 110-50 not required
MODEL TURBULATOR LENGTH
(IF REQUIRED)
STS-p 110-30 14'
STS-p 80-40 10’
STS-p 80-30 14'
STS-p 80-20 14'
STS-p 60-30 14’
STS-p 60-20 14'
STS-p 45-20 5’
STS-p 45-10 5’
STS-p 110-40 10'
Where required the STS-p Series Heaters will be supplied with the turbulators, factory
installed into the end tube(s) of the system configuration. NOTE:
FIGURE 12 PLATE HANGER/ELBOW INSTALLATION
5 90 0 (shown) or 180 0 Elbow
6 Tube Coupler
7 Point at which Swaged tube is fully
inserted into elbow and Swaged end of
elbow is fully inserted into tube.
1 End-Plate-Hangers
2 Focus Shield Reflectors
3 End-Plate-Hanger Flange OVER
Reflector
4 End Plate Hanger Flange UNDER
Reflector
1
2
2
3 3
4
4
5
6
7