Schwank SCH-200 Construction - Manual (Page 8)

SP-MCH2-BX-07A
SCH-200 MANUAL
R.D: Sept 2004
RL: 7
KH
1.5 MOUNTING INSTRUCTIONS
FIGURE 1: FREE STANDING FLOOR MOUNT
A steel rod, non-combustible base is an integral part of this heater.
The heater may safely be placed directly on a combustible surface.
Always maintain minimum distance to combustibles as shown in
Table 2. Gas supply hose/piping must lay over the top of bottom
rim of heater as shown here.
On floor mounted units, the Gas supply
line must lay above the bottom rim of
heater. See Figure 2.
Surface of heater will be hot to the touch.
Take proper precautions. If heater
location must be changed, allow
heater to cool a full 15 minutes before
attempting to relocate.
NOTE: Heater is equipped with a tilt safety
feature. Heater will automatically shut down
when it is tilted over 35 degrees.
WARNING CAUTION
GAS SUPPLY LINE
Page 4