Brother INTELLIFAX 3550 - Manual (Page 51)

6 - 7
3550-US-5.0
Ch.
6
If You Get a MEMORY FULL Message When Trying to Send a Fax by
Using Super Quick-Scan
If the memory becomes full when scanning page 1 and the display shows PRESS
STOP KEY, then press Stop to abort the job.
If the memory becomes full on page 2 or more of a multipage document, you will be
prompted to press Start to send the portion already scanned, or to press Stop to
abort the job.
FOR YOUR INFORMATION
THE DISPLAY WILL SHOW: KEYS TO PRESS
Setting the Daily Timer (for Delayed Transmissions)
The Daily Timer function lets you send a fax at a preset time every day. This is handy for sending
delayed jobs that must go out at the same time daily. Once you enter the time, you don’t have to
enter it again. The setting will stay the same until you change it. So you can use it every day,
or only on days when you need it.
1. Press Function .
2. Press 7 .
3. Press 2 .
4. Enter the time in 24-hour format
using the number keys.
Example: 19:45 (7:45 P.M.).
5. Wait for two seconds, press Stop to
exit.
0 9 / 1 2 / 1 9 9 6 1 5 : 2 5
1 . T E M P . S E T T I N G S
7 . S E T U P S Y S T E M
2 . D A I L Y T I M E R
E N T E R T I M E : 0 0 : 0 0
E N T E R T I M E : 1 9 : 4 5
2 . D A I L Y T I M E R
Delayed Transmission
You can use the timer to send documents at a later time (up to 24 hours later). When the preset
time is displayed, accept it or enter a new time if needed. Your fax machine also will produce a
report, the “Delayed Sending Report”, after the fax is sent. You can set up to three different
documents for delayed transmission.
1. Insert the documents into the
feeder.
THE DISPLAY WILL SHOW: KEYS TO PRESS
0 9 / 1 2 / 1 9 9 6 1 5 : 2 5
FAX: NO. & START
C O P Y : P R E S S C O P Y
ADVANCED FAX TRANSMISSIONS
SENDING FAXES