Brother INTELLIFAX 3550 - Manual (Page 64)

6 - 2 0
3550-US-5.0
4 . E R R O R R E - T X
E R R O R R E - T X : O N
KEYS TO PRESS
ECM (Error Correction Mode)
The Error Correction Mode (ECM) is a way for the machine to check the integrity of a fax
transmission while it is in progress. ECM transmissions are possible only between machines that
both have the ECM feature. If they do, you may send and receive fax messages that are
continuously checked for their integrity.
Sufficient memory must be available in your machine for this feature to work.
Error Retransmission
Error Retransmission is helpful when the receiving machine does not have ECM. Even though
your machine can not check the integrity of the message, it will send the affected page(s) again
after occurrances of accidental noise have caused an error.
This feature is available only for memory transmission using Super Quick-Scan (see
page 6-6~10).
1 . T E M P . S E T T I N G S
4 . E R R O R R E - T X
E R R O R R E - T X : O F F
SELECT { } & SET
5 . U S E R O P T I O N S
1. Press Function .
2. Press 5 .
3. Press 4 .
4. Press Z (left arrow) or X (right
arrow) to choose either ON or OFF.
Example: ON.
5. Press Set .
6. Press Stop to exit.
THE DISPLAY WILL SHOW:
0 9 / 1 2 / 1 9 9 6 1 5 : 2 5
SENDING FAXES
FAX TRANSMISSION OPTIONS