Mounting accessories – SDC E300 SERIES MAGNETIC LOCK User Manual
Page 4
P:\INSTALLATION INST\Electromagnetic Locks\EXCEL\INST-E300.vsd REV -
07-10 Page 4
To maintain surface plating from corrosion:
Do not touch the lock face with your hands.
Clean lock face with Scotch-Brite pad by 3M (do not use sandpaper).
Apply a thin film of rust inhibitor (LPS-3) on lock face.
Repeat application on armature plate.
Supplied Mounting Hardware
ANGLE BRACKET
E12L
Inches: 10.5" L x 0.5" H x 0.75" D
mm: 266 L x 12.7 H x 19 D
May be field cut for use with E600
ADJUSTABLE ANGLE BRACKET
E6A
For use with Model E600 Series
STOP FILLER PLATE
EF02
Inches: 10.5" L x 0.5" H x 0.75" D
mm: 266 L x 12.7 H x 19 D
May be field cut for use with E600
GLASS DOOR ARMATURE BRACKET
E6U
For use with Model E600 Series
Field adjustable for glass thickness
TOP JAMB MOUNTING BRACKET
E6Z
For use with Model E600 Series
MOUNTING ACCESSORIES: