Sensaphone Express II - Manual (Page 45)

43
Chapter 5: Programming
5. Sound Alarm Reset Time—After a sound alarm is
acknowledged, Express II stops the dial out sequence.
However, the high sound condition will still exist
until the alarm clears itself or some action occurs
to clear the alarm. If the high sound is not cleared
after a certain amount of time, Express II can be
programmed to restart the dial out sequence. This is
called the sound alarm reset time. This parameter may
be programmed from 2 seconds to 12 hours.
If the alarm reset time is programmed to 0 seconds,
the feature is disabled. Express II will not restart the
dial out regardless of how long the alarm exists.
6. Sound Dial Out Selection—You may program
Express II to dial specific phone contacts if a high
sound alarm occurs. This is the Sound Dial out
selection. To return to the default, all contacts, press
“9” “9,” and then press ENTER.
7. Mute Local Speaker—When the Express II
detects an alarm, it announces the alarm locally for
the duration of the Call Delay. If the Mute Local
Speaker is enabled, it is silent for that time period.
The default is
Disabled.
Chapter 5: Programming
5-Alarm Reset Time:
1) Press 5 for Alarm Reset Time.
2) Enter hours.
Enter minutes.
Enter seconds.
6-Dialout Selection:
1) Return to the Sound Parameters
menu. Press 6 for Dial Out Selection.
2) Enter the position numbers, (1-48), of
the phone contacts to be called in the
event of a high sound level alarm.
3) Enter list of dial out selection.
Press individual position numbers. (1-48)
Press Enter.
4) When all position numbers in list are
entered, press Enter again.
5) The default is all contacts.
Press “ 9” “9” for the default.
7-Mute Local Speaker:
1) Press 7 for Mute Local Speaker at the
Sound menu.
2) Press 1 to disable.
Press 2 to enable.