Sensaphone Express II - Manual (Page 60)

58
Sensaphone ® Express II User’s Manual
Inquire Alarms:
To check alarm information, press INQUIRE and then
ALARMS. If there are any unacknowledged alarms, the
Express II will recite which input alarms have not been
acknowledged. Otherwise it will tell you that no alarms are
active.
Halt Mode Delay Time
Halt mode allows you to disable all inputs and prevent
dial-out for a user-programmed time. Halt mode is useful
if you must perform periodic tests or other activities that
would trip false alarms and initiate dial out. The Input
lights will flash red for the duration. Halt mode can be
programmed from 0 seconds to 12 hours.
To initiate Halt mode press the orange HALT button. To
exit Halt mode press ALARM CANCEL.
NOTE: If you program the halt mode time to zero, the halt
mode feature is disabled. The default setting is
1 hour.
(See also “Halt mode delay time” as part of the System pro-
gramming section of Chapter Five.)
58
Inquire Alarms:
1) Press Inquire
2) Press Alarms
Halt Mode Delay Time:
1) Press Halt
To Exit Halt mode, press Alarm
Cancel.