Sensaphone 800 - Manual (Page 22)

Sensaphone
®
Model 800 User’s Manual
20
Layout
1. Programming Keypad
2. Power Jack
3. Phone Extension Jack
4. Phone Line Jack
5. Speaker
6. Built in Microphone
7. System on LED
8. Phone-in-use LED
9. Alarm LED
10. Battery OK LED
11. Battery Compartment
12. Input/Output Wiring
Door
LED INDICATORS
The LEDs provide on-site alarm and status information. Listed
below are descriptions of how the LEDs work.
System On
LED Off: Unit is off
LED On: Unit is in Run mode
LED Blinking: Unit is in Standby mode
Phone-In-Use
LED On: The unit or some other device is
communicating on the phone line
LED Off: Phone line is not in use
LED Blinking: No telephone service detected
1
2
4 3
5
7
9
8
6
11
10
12