Bradley Smoker TDB3108 - Manual (Page 13)

Installation TDB3108, WF3208 Terreon ® 54" Circular
13 Bradley Corporation • 215-1187 Rev. N; EN 06-915B 4/6/2007
Installation Instructions continued . . .
TOP COVER
Figure 7
I.R. MODULE
ASSEMBLY
S50-344
SPRAYHEAD
S05-054 SUPPORT TUBE
(STD.) S57-005
(JUV.) S57-006
COUPLING
NUT
SPACER
SOAP
DISPENSER
TIE ROD
(STD.) 21-5/8"
(JUV.) 18-1/8"
UNIT WITH “A” DRAIN AND I.R. MODULE
SHOWN, ALSO AVAILABLE WITH “O” DRAIN
COUPLING
NUT
4-1/4"
TIE ROD
8-5/8"
TIE ROD
MODULE
COVER
TIE BAR
PLACE THE INFRARED MODULE ASSEMBLY ON TOP OF SPRAYHEAD. ROTATE UNTIL INFRARED MODULE LOCKS IN WITH TIE BAR.
DROP TWO INFRARED MODULE WIRES DOWN TO VALVE ASSEMBLY. D
SECURE INFRARED MODULE COVER AND TOP COVER WITH ACORN NUT AND SET SCREW.
E
FOR O UNIT: INSTALL 1/2" NOMINAL COPPER TUBING SUPPLY LINES (PASS THEM THROUGH HOLES IN COVER DOWN
THROUGH SUPPORT COLUMN) AND CONNECT TO STOPS USING SUITABLE FITTINGS.
F
FOR UNITS WITH SOAP OPTION, INSTALL THE SPACER, SOAP DISPENSER AND COVER USING THE THIRD TIE ROD (8-5/8" LONG)
AND SECOND COUPLING NUT AS SHOWN (SEE FIGURE 7). SECURE WITH ACORN NUT AND SET SCREW. •
NOTE!
Skip to step E for units without soap.