Bradley Smoker TDB3108 - Manual (Page 25)

Installation TDB3108, WF3208 Terreon ® 54" Circular
25 Bradley Corporation • 215-1187 Rev. N; EN 06-915B 4/6/2007
Sprayheads — Standard w/Neoprene Spray Ring Grommet
3
2 1
10
4
5
7
6 8
9
1 125-001DE Neoprene Washer-Top 1 1
2 139-031 Sprayhead Manifold 1 —
3 124-001AL Washer 3 4
4 160-211 Carriage Bolt 3 4
5 115-061 Sprayhead Top 1 —
6 116-008 Sprayhead Bottom 1 —
7 124-001AT Washer 3 4
8 161-025 Nut 3 4
9 124-020D Sprayhead Grommet - Semi-circle 1 —
10 125-001DF Neoprene Washer-Bottom 1 1
Sprayhead Repair Kit
Assembly S05-054B S45-051
Item Part No. Description Qty
Parts List
NOTE: Repair kit does not include sprayhead
grommet. Order as a separate item.
Sprayhead Service Suggestions
Problem: Water splashes over the rim of the bowl.
Cause: Foreign matter has reduced the size of the sprayhead slots, causing greater pressure at the open slots.
Solution: Clean the sprayhead:
1. Disassemble the sprayhead and dislodge any dirt, lime build-up and foreign debris with a wire brush.
2. Sprayheads with rubber grommet spray rings may be cleaned by rubbing a coin over the grommet.
3. Throttle down the volume control (water spray should strike the bowl without splashing outside of the bowl).
Problem: Water flow diminishes from the sprayhead.
Cause: Strainer portion of the stop-strainer-check valve is plugged.
Solution: Remove and clean the strainer screen from the stop-strainer-check valve.
NOTE: The sprayhead shown above includes a perforated neopreme spray ring grommet that is self-cleaning. The water pressure flexes
the spray holes which slows accumulation of foreign matter and tends to “break loose” any such deposits that may have accumulated.