SPYPOINT S-HD-12 - Manual (Page 4)

6 7
English
English
CONTENTS
• SPYPOINT ® HD-12/S-HD-12
• Wireless motion sensor (MS-1/S-MS-1)
• Installation straps (2)
• USB cable
• Audio/video cable
• User manual
POWER
The battery level is shown in the bottom right corner of the
screen when the camera is in "TEST" mode. When a single
line remains, the camera will continue to take pictures but we
strongly recommend changing the batteries before they are
empty. (See figure below)
AA batteries
This camera requires the use of 6 AA batteries (1.5V). The use
of alkaline or lithium batteries is strongly recommended. Also
note that the voltage of rechargeable AA batteries (1.2V)
is insufficient to power your SPYPOINT
® camera. While
installing the AA batteries, slide the switch inside the battery
case to "ALK". Insert the batteries as indicated inside the
battery case and follow the exact polarity. We also recommend
the use of new batteries to ensure maximum performance of
your camera.
Lithium battery pack
This camera SPYPOINT
® can be powered by a rechargeable
lithium battery pack LIT-09/LIT-C-8 (sold separately, refer to
the section "OPTIONS"). This type of battery is less affected
by cold temperatures and lasts up to 3 times longer than an
alkaline battery. While installing the lithium battery pack, slide
the switch inside the battery case to "LIT-09".
External (12V)
The camera can also be powered from an external 12-volt
DC input such as a 12-volt battery (KIT-12V/BATT-12V, sold
separately) or a 12-volt adapter (AD-12V, sold separately).
During the installation of a 12-volt connection, slide the switch
inside the battery case to
"ALK" . If combined with a lithium
battery pack, slide the switch to "LIT-09" . For the accessories
available, refer to the section "OPTIONS".
Solar panel
This model also offers the possibility to connect a solar panel
SP-12V (sold separately, refer to the section "OPTIONS") to
maintain the charge of the lithium battery pack (sold separately,
refer to the section "OPTIONS") or the 12-volt battery (sold
separately, refer to the section "OPTIONS"). While installing
the rechargeable lithium battery or 12-volt battery, slide the
switch inside the battery case to "LIT-09" to activate the
charging system of the solar panel.
Power source Switch position
• 6AA
• 12V
• 12V + 6AA
ALK
• LIT-09
• 12V + LIT-09
• Solar panel + LIT-09
LIT-09