SPYPOINT S-LIVE-3G - Manual (Page 11)

20 21
English
English
Sensitivity:
(Low/Medium/
High)
Sets the detection sensitivity of the camera.
Note: The system detects only heat sources in
motion. So it is important during installation to
avoid as much as possible, objects obstructing
the camera . This prevents the camera from
being triggered because of the sun reflecting on
these objects. (e.g. a tree branch)
Power:
(Batteries/
Electricity)
Allows the user to select the type of power
supply.
Choose «Electricity» if the camera is powered
by a main electric supply. (using a 12-volt DC
adapter AD-12V, sold separately). Main electric
power supply is recommended when use for
security purposes. It provides an instant trigger
time when a movement is detected. The lithium
battery and AA batteries pack can remain safely
inside the camera and it is ideal in case of a
blackout. A 12-volt DC adapter that can provide
a minimum of 800 mA is required
(See OPTIONS for accessories).
When the option «Electricity» is enabled:
• The option «Delay» is reduced and locked to 2
seconds to speed up the photo shooting.
• The «Multi-shot» speed is improved with a 2
seconds delay between each take.
• The option «Time Lapse» is disabled
• The option «Synchronize» is locked on
«Permanent» to allow the transmission of
pictures at every synchronisation.
• The option «Synchronize at» is ignored.
• If the option «Multi-shot» is enabled, the
transmission is performed once the series of
photos is recorded.
• The camera is synchronized with the server
every 10 min. and uses an average of 1.4Mb
of data per day excluding the weight of
pictures transmitted during this period.
• The viewing screen may light up momentarily
during synchronizations.
One LED
Continuous:
(Yes/No)
Allows the camera to operate in continuous
mode. When there is no more space available on
the memory card to record photo or video, the
camera continues to record by erasing the oldest
files and by replacing them with newest ones.
Infrared:
(On/One LED/
Off)
Selects the desired infrared illumination mode.
ON: All LEDs illuminate when taking photos or
videos at night.
One LED: Only a single LED illuminates (see
figure). This option can be useful when using an
IR-Booster.
OFF: LEDs are deactivated so your night
photos or videos are pitch black.
Remote :
(REMOS™)
(On/Off)
Allows the user to activate or deactivate the
detection of the camera (#1,2), to remotely take
a photo or a video on command
in an area of 500
ft (#3) and to launch the cellular synchronization
between the camera and the mySPYPOINT
™
server (#4).
IR-Booster
(Remos™)
(On/Off)
Allows the camera to trigger, up to a distance
of 50 ft, one or more remote IR-BOOSTER
infrared lighting devices without the use of an
additional transmitter.
MS-1:
(Remos™)
(On/Off)
Allows the camera to be triggered wirelessly by
one or more MS-1 devices. (see OPTIONS for
details)
1 2
3 4