SPYPOINT S-LIVE-3G - Manual (Page 9)

16 17
English
English
Stamp:
(Yes/No)
Select or cancel printing the date, time,
temperature and moon phases on photos.
New moon:
Waxing Crescent:
First Quarter:
Waxing Gibbous:
Full moon:
Waning Gibbous:
Last Quarter:
Waning crescent:
Temp.
format:
(°F/°C)
Changes the temperature display.
Language:
(English/Français/
Deutsch)
Sets the display language of the camera’s menus.
Theft alert:
(Yes/No)
In case of theft, this option allows the camera to
switch into an alert state.
• The user receives an alert message to his email
address or by an SMS message to his cellphone
(fees may apply for SMS messages) giving
information about when the camera was moved
for the last time (See SMS CONFIGURATION
for details)
.
• The latest recorded photos are sent on the
user's account starting with the most recent .
Note: Photos are sent in «Large» format only.
• If « My camera was stolen» is checked on the
mySPYPOINT ™ account in «Status» section,
the interface of the camera is locked and the
GPS coordinates continue to be sent every 10
minutes to locate the camera.
Mode:
(Standalone/
Cellular/Security)
Sets the operating mode of the camera.
When «Standalone» mode is activated:
• The camera operates normally by recording
photos or videos locally on the memory card.
• The options «Theft alert», «Carrier»,
«Synchronize», «Synchronize at» and
«Transmit format» are disabled since no
cellular communication is performed in this
mode.
• The presets of the «Time Lapse» option are
reduced to 15s/30s/1min/5min/10min/30min/
1h/2h. (See the option «Time Lapse»)
When «Cellular» mode is activated:
(A subscription to mySPYPOINT
™ is required,
visit www.myspypoint.com for details)
•
The camera operates in cellular
transmission mode and communicates
with mySPYPOINT
™ server following the
presets of the options «Synchronize» and
«Synchronize at».
• Videos cannot be sent to the mySPYPOINT ™
user’s account.
• Photos are also stored locally on the memory
card.
Note: In Cellular mode, it is recommended to
use an external 12-volt input (BATT-12/KIT-
12V/AD-12V, sold separately) in order to get
best results and longer battery life (see «Power
Supply» for details).